User's Manual

164
When you press “enter” on the “custom dictionary” dialog, the
following items will be displayed:
1) List: it shows the words that are registered in the custom dictionary.
(Example: Braille 1/20). If there are no words registered, “no list”
will be displayed.
2) Add word (a): if “enter” is pressed on this button, “add word:” will
be displayed. If you want to add a word, press “enter” after you
enter the new word. Then, the new word is added and the Braille
Sense Plus B32 exits to the “add word” button.
3) Modify word (m): select the word to be modified on the “list” and
then press “enter.” The “modify word:” message is displayed.
Input the correct word that will replace the selected word and then
press “enter” in order to modify the selected word. The “modify
word” button will be displayed again after the Braille Sense Plus
B32 modifies the selected word.
4) Delete word (d): select the word to be deleted on your “list” and
press “enter” in order to delete the selected word.
5) Cancel: this command closes the dialog box.
You can move from one item to the next item by pressing “tab
(space-4-5)” or “shift-tab (space-1-2).”
When you press “enter” on the “option” dialog, the following items will
be displayed:
1) Always suggest recommended word: if this option is set to “on,”
the Braille Sense Plus B32 will suggest a word if the word that is
encountered is not in the dictionary. The default is set to “on.” If
the option is set to “off,” the Braille Sense Plus B32 will not
recommend a word. In order to toggle between “on” and “off,”
press “space.”
2) Use main dictionary only: if this option is set “on,” the spell
checker will not look up any words in the “custom dictionary.” It
will only use the main dictionary. The default value is set to “off,”
and you can toggle between “on” and “off” by pressing “space.”
3) Skip an upper-case word: if this option is set to “on,” words with
only upper-case letters will not be checked. The default is set to
“on,” and you can change it by pressing “space.”