User's Manual

167
4) Press “enter.” Then, “service name: (registered service name)
1/yy” will be displayed. You can move to this stage directly by
pressing “enter-m (dots 1-3-4).” Then, the Braille Sense Plus B32
will display the first item of the “service manager” that is in “service
list.”
The “service manager” contains the following 6 items.
1) Service list
2) Information
3) Register
4) Modify
5) Delete
6) Close
You can move among these items by pressing “tab (space-4-5)” or
“shift-tab (space-1-2).” You can execute each item by pressing
“enter” on the desired item that is displayed.
If you want to exit from the “service manager,” move to the “close”
button, and then press “enter.” Or, press “space-e (dots 1-5)” or
“space-z (dots 1-3-5-6).”
The following is a detailed explanation of each item. “Register” was
already explained in section 7.1.2. Please refer to that section for
information about “register.”
7.5.1.1 Signature and Advanced
If you activate the “service manager,” you will see “service name:
your registered service name 1/xx” in the list. While registering your
account, you can use “signature” to add a signature to all e-mail
messages that you write, and “advanced” setting to changed
advanced options.
1) Just as in Section 7.1.2, “registering e-mail service,” when you are
registering the “smtp server” in step 13. Then, you can press “tab
(“space-4-5”)” to go to the “advanced” button.
2) Press “enter” on the button.
3) You will hear “use secure POP3 (POP-SSL).” This check box is u
nselect by default. If the pop3 server uses the “SSL,” select the ch