User's Manual

173
7.5.2.2 Set the Send Attachments Path
“Send attachments path” is the path where the files to be attached
are saved. The default path is “/flashdisk/upload.” You can change
this path to a different path using the following method:
1) Execute steps 1 – 5, as explained in section 7.5.2.
2) Press “space-4” to move to “send attachments path:
/flashdisk/upload.”
3) Press “enter” or “m (dots 1-3-4)” on “send attachments path:
/flashdisk/upload.” Or, press “tab (space-4-5)” to move to the
“modify” button and then press “enter.”
4) Then, “no list” will be displayed when the “/flashdisk/upload” folder
is empty. But, if the folder has a lower level folder, “(Folder name)
1/yy” will be displayed. When “send attachments path” is executed,
the Braille Sense Plus B32 will only show the folder. So, if there
are no folders in the “upload” folder, it will show “no list.”
5) Move to the desired folder by pressing the following keys:
Move to the upper level folder: Backspace
Move to previous item: Space-1
Move to next item: Space-4
6) Press “space” to select the desired folder, and press “enter.” “*”
will be displayed in front of the selected folder.
If you finish setting the path by pressing “enter,” the Braille Sense
Plus B32 will show the changed path. If you changed the path from
the “upload” folder to the “music” folder in the “flashdisk,” it would
display “send attachments path: /flashdisk/music.”
7.5.2.3 Set the Disk to save E-mail
The e-mail messages that are downloaded from your network are
saved in the “email” folder, which is a lower level folder of “flashdisk.”
If the size of an email you are receiving is so large that it cannot be
downloaded and stored in the “flashdisk,” you can change to a
different disk using the following method:
1) Connect the external storage disc to the Braille Sense Plus B32.
2) Execute steps 1 – 5, as explained in section 7.5.2.
3) Press “space-4” to move to “disk to save E-mail in: /flashdisk.”