User's Manual

179
address, or host. In this case, you need to modify the subject while
typing them in.
Please refer to the following correction methods:
1) In order to delete the current letter, press “space-d (dots 1-4-5)”
2) In order to delete the previous letter, press “backspace.”
3) In order to delete the current line, press “backspace-1-4.” Then,
“delete line: yes” will be displayed. Press “enter” to delete the line.
Or, if you do not want to delete the line, press “space” to toggle
“yes” to “no,” and then press “enter.”
If you want to cancel setting spam at the “add dialog box,” press “tab
(space-4-5)” to move to the “cancel” button, and press “enter.” Or,
just press “space-e (dots 1-5)” or “space-z (dots 1-3-5-6).”
7.5.4.2 Modifying Spam Registration
In order to modify information that has been registered you can also
use the methods explained in section 7.5.4.1.
In order to modify a “subject” that has been registered, do the
following:
1) Execute steps 1 through 5, as explained in section 7.5.4.
2) Move to “list” by pressing “tab (space-4-5).” Then, “subject:
(Registered word) 1/xx” will be displayed.
3) Press “space-4” or “space-1” to move to the word to be modified.
4) Press “m (dots 1-3-4)” on the word to be modified. Or, press “tab
(space-4-5)” to move to the “modify” button, and press “enter.”
5) Then, the modify dialog box will be opened, and “subject modify:
(Selected word)” will be displayed.
6) If you type in a new word directly, the displayed word will be
erased, and the new word will be displayed. If you want to modify
a part of the displayed word, press the “cursor routing key” at the
position where you want to modify the word, and type in the letters
that you want to modify.
7) Press “enter” after you type in the new word. Or, press “tab
(space-4-5)” to move to the “confirm” button, and then press
“enter.”