User's Manual

206
9. Radio
In order to use “Radio” program in the Braille Sense Plus B32, please
connect the headphone to the headphone jack of the Braille Sense
Plus B32. The headphone connected to the Braille Sense Plus B32
will work as a radio antenna.
In the program menu, please press scroll buttons to move to the
“Radio” and press “enter,” or just press “r (dots 1-2-3-5)” in order to
execute radio program. Once the radio program is executed, your
Braille Sense Plus B32 will announce the radio frequency. If you had
executed the radio program, the Braille Sense Plus B32 will tune to
the frequency that you listened to and announce the frequency.
For your reference, the frequency range of the Braille Sense Plus
B32 is from 87.5MHz to 108MHz.
9.1 Listening to radio via internal speakers
When you execute radio program after connecting the headphone to
the headphone jack, sound from the radio will output through the
headphone. If you want to listen to the radio through not only the
headphone but also internal speakers, please set as follows;
1) Press space-m (dots 1-3-4) to call the radio menu and press “ente
r” at “file” menu and then press “enter” at “settings.”
2) Or without calling menu, press “enter-e (dots 1-5)” in order to call t
he dialog box.
3) Then the dialog box will be opened and “external speaker: No” is a
nnounced in voice.
4) Press “space” once to switch from “no” to “yes” and press “enter.”
Then you can hear the radio sound from both headphone and internal
speakers.
This setting is valid only in the Radio program. If you exit from Radio
program and hear the sound through speakers, you have to unplug
the headphone.
If the external speakers are selected in the “settings” dialog box and
“space-4” is pressed, the Braille Sense Plus B32 will announce