User's Manual

209
If you want to delete any channel from the registered channels, select
the desired channel in the channel list and move to “delete” button by
pressing “tab (space-1-2)” and press “enter.”
In order to exit from the preset manager dialog box, press “enter” at
the “close” button, or just press “space-e (dots 1-5).”
Registering the channel and move among the registered channels
are available using audio buttons on the front panel, too. In order to
use the audio buttons, audio mode switch should be set to “FM
radio.”
If you press “record” button more than 2 seconds, “register dialog
box” will be opened. In order to move to the previous channel to be
registered, press “previous” button for more than 2 seconds. Pressing
“next” button for more than 2 seconds will move to the next channel
to be registered.
Pressing “stop” button for more than 2 seconds will delete the
selected channel.
9.4 Recording radio sound
If you want to record the radio, press “space-m (dots 1-3-4)” to call
menu, move to “record (r)” and press “enter.” Or just press “enter-r
(dots 1-2-3-5)” without calling menu. Then the record dialog box will
be opened and the Braille Sense Plus B32 starts recording.
The record dialog box consists of “pause/continue” button, “stop”
button, “cancel” button and “record status” status bar. You can move
among these controls by pressing “tab (space-4-5 or F3)” or “shift-tab
(space-1-2 or space-F3).”
While recording the radio, if you press enter at “pause” button,
recording will pause, and the name of button is changed to
“continue.” If you press “continue” button, recording will be continued.
“Record status” will show the frequency of the radio under recording.
If you press “enter” at “stop” button, recording radio will stop.
Recorded files will be saved in the “flashdisk/media/radio” folder. The
file name will be “registered channel label (frequency)-xx.mp3.” “xx”
will start from 01 and increased by one when recording the radio
sound. If unregistered channel is recorded, “radio” will be used as a
file name instead of “registered channel label.” If you stop recording,
the record dialog box will be closed automatically. If you press “enter”