User's Manual

214
Web Browser is open. When “open URL” is executed, the edit
window for an address will be displayed. On the Braille display, you
will see the address of the current page. You can enter a new web
page address that you want to connect to. You need to enter the new
address in computer Braille such as “www.yahoo.com.” Then, press
“enter.”
You can check the addresses that have been entered previously by
pressing the down arrow key (“space-4”). Move to the address that
you want to open using the up arrow key (“space-1”) or the down
arrow key (“space-4”), and press “enter” when the desired URL is
displayed on the Braille display. You can go to a specific web page
either by typing in a new address, or by selecting one of the
previously entered addresses.
If the Braille Sense Plus B32 cannot connect to the desired web page,
and it only shows progress on the Braille display, press “backspace-
enter” to stop connecting, and call up “open URL” again. You can
type in the address and try to connect again. You can stop the Web
Browser from connecting by pressing “space-z (dots 1-3-5-6).
Sometimes, this can happen due to network or Internet problems.
10.1.2 Open
In order to enter into “open,” press “space-m (dots 1-3-4)” or “F2” to
call up the “menu,” and press “enter” on “file.” Go to “open” by
pressing “space-4,” and press “enter.” Or, you can press “enter-o
(dots 1-3-5)” when the Web Browser is active. Then the “open dialog
box” will show up.
“Open dialog box” consists of “file list,” “file name,” “type,” “confirm”
button and “cancel” button. You can move among those controls by
pressing “tab (space-4-5)” or “shift-tab (space-1-2).” When the “open
dialog box” is opened, “file name” will be focused. Type in a file name,
and press “enter,” or press “shift-tab (“space-1-2”)” to move to the file
list. Select the desired file name, and press “enter.”
The default folder is “/flashdisk/download,” and it can be changed by
the same method as explained in the “file manager.”
There are three types of files in “file type”; “*.*,” “htm,” “html.” Default
is “*.*” and it means that all types of files will be shown in the file list.