User's Manual

5
Plus B32 on the right side panel, you will find the USB OTG port. If
you connect the unit to a personal computer by using this USB port,
you can transfer files that are stored in the Braille Sense Plus B32 to
your personal computer, and vice versa.
Continuing toward the back of the unit on the right side panel, you will
find the USB port. You can connect a USB stick memory in this USB
port, for auxiliary storage.
The last thing you will find on the right side panel of the unit is the AC
adapter jack. The AC adapter will plug in to this hole, and then plug in
to a standard AC electrical outlet, so that you can use the Braille
Sense Plus B32 with electricity, instead of using power from the
battery.
1.2.3 Left Side Panel
Now, let's take a look at the left side panel of the unit. If you move
your finger to the left side of the Braille Sense Plus B32, you will find
CF slot. You can insert CF card (compact flash card) in CF slot.
Continuing toward the back of the unit on the left side panel, you will
find the SD port. You can insert SD card (secure digital card) in SD
slot.
1.2.4 Rear Panel
Next, let's take a look at the rear panel of the Braille Sense Plus B32.
On the far left of the rear panel, you will find a small button in round
groove. This is the reset button. If your unit is not responding
properly, you can press this button with your finger, which will reboot
the unit via a hard reset. Pressing the reset button is a hardware
reset. Do NOT press the reset button for more than 5 seconds. You
can also do a soft reset by pressing F2-F3-1-2-3-4-5-6. This is a
software reset, instead of a hardware reset.
If you press down dots 1-2 and the reset button at the same time
while the power is on, the Braille Sense Plus B32 will turn on without
speech.
When the reset button is pressed, the Braille Sense Plus B32 will
reboot. It will take about fifteen seconds for your unit to complete the
reboot process.