User's Manual

239
between these items with “space-1” or “space-4.” You can activate
the selected item by pressing “enter.”
11.2.1 Open DAISY
You can open another DAISY file with using “open DAISY.” To get to
“open DAISY,” press “space-m (dots 1-3-4) to call up the menu, and
then press “tab (“space-4-5”) until you hear “open DAISY.” Or, you
can use the hot key “enter-o (dots 1-3-5)” without pressing “space-m
(dots1-3-4).”
When you activate “open DAISY,” you can see the disk list while
pausing or playing a file. Once here, you can open a file, as
explained above in section 11.
You can open “open DAISY” dialog box by long pressing “stop” button
when play or pause the DAISY contents. And if you long press the
“stop” button again, this dialog box will close. And then return to the
previous position.
“Play” button is same function as “enter” in “open DAISY” dialog box.
Also “stop” button, “record” button, “previous” button and “next” button
is same function as “backspace”, “space”, “space-1” and “space-4” in
“open DAISY” dialog box.
Namely, you can move to up and down by pressing “previous” and
“next” button in list of “open DAISY” dialog box. And you can select
and unselect by pressing “record” button. If you press “stop” button,
you can move to upper folder. And if you press “play” button, you can
play the selected file in file list of “open DAISY” dialog box.
In order to use this function, you must set the audio mode switch to
“DAISY mode.”
11.2.2 Voice Settings
In the “voice settings,” you can set the DAISY Player voice
parameters. Press “space-m (dots1-3-4)” or “F2,” and navigate to
“voice settings,” which is located under the “file” menu. Or, you can
activate the “voice settings” by pressing the hot key “enter-s (dots 2-
3-4).” If you activate “voice settings,” you can open the “voice
settings” dialog box without stopping the file that is currently playing.
In the dialog box, you will find the “voice control” tab with “set speed,”
“set volume,” a “confirm” button, and a “cancel” button. You can