User's Manual

249
devices. Please wait…” message and beep sound when this process
begins. And when the Bluetooth device is detected, the Braille Sense
Plus B32 announces “find (Bluetooth device name).” Until the end of
scanning all devices, any keys on the Braille Sense Plus B32 will not
work, and you cannot stop scanning the device. You have to wait until
the completion of the scanning devices.
If Bluetooth option in Option menu set to “off,” or if the Braille Sense
Plus B32 does not recognize it, the Braille Sense Plus B32 will say
the message, “Bluetooth not activated.” Then, the Braille Sense Plus
B32 will automatically exit the Bluetooth Manager.
Once the Braille Sense Plus B32 has found other Bluetooth devices
that are in range, they will be displayed as “device name(untrusted
(or trusted)) xx/yy” where xx is the number where the device appears
in the list, and yy is the total number of devices. And “trusted” means
that the service has been authenticated, and “untrusted” means that
the service has not been authenticated.
This part of the Bluetooth Manager is known as the Bluetooth Device
List, and thus, the menu for this section is called the Bluetooth Device
List menu. If there are no other Bluetooth devices in range, the
Braille Sense Plus B32 will say “no list 0/0.” You can press “space-1”
or “space-4” to move through the list. To select the device from the
list, press “enter” on the device name.
If the Bluetooth device trusted, the device setting will be automatically
saved in the memory of the Braille Sense Plus B32. If you want to
delete this setting, you press “enter-s (dots 2-3-4)” on Bluetooth
device name in the Bluetooth Service List. The Braille Sense Plus
B32 will say “Device settings removed.” Removing this setting will
apply only to the current device.
Once the Braille Sense Plus B32 has finished searching for other
Bluetooth devices, you can access the menu by pressing “space-m
(dots 1-3-4)” or by pressing “F2.” The “Bluetooth Device List menu”
has the “scan device,” “device name” and “exit.” You can navigate the
menu items with “space-1” or “space-4.”
The first menu item is “scan device.” This item allows you to rescan
for other Bluetooth devices. To activate this item, press “space-m
(dots 1-3-4)” for “F2” and then press “enter” on “scan device.” You