User's Manual

256
file is not pasted successfully, you will hear, “xxx file not pasted.”
After the file is pasted successfully, you will also hear, “paste
completed,” and you will be returned to the remote folder list.
The following steps should be used to copy a file from the remote
folder list to the local folder list:
1. After the FTP service has connected, you can navigate through
the remote folder, just like in the file manager. If you need to
reference the navigation keys for the file manager, please refer to
chapter 3 in this manual.
2. Once you have selected the files that you want to copy by
pressing the “space,” you can open the FTP menu by pressing
“space-m (dots 1-3-4),” and then use “space-1” or “space-4” to
navigate to “copy,” and press “enter.” You can also activate this
function without calling up the menu by pressing “enter-c (dots 1-
4).” Note that you cannot copy folders to send to the local folder.
3. Next, open the menu by pressing “space-m (dots 1-3-4),” move to
“open local folder” with “space-1” or “space-4,” and press “enter.”
You can also activate this function without calling up the menu by
pressing “enter-o (dots 1-3-5).” After you have activated this
function, you will see the Disk list, just like when you open the file
manager. You will be taken to “flashdisk” by default. However, if
you have a CF memory card or USB memory stick inserted, you
can navigate to those disks by pressing “space-1” or “space-4.”
Please refer to chapter 3 in this manual regarding navigation keys
in the file manager.
4. After entering a disk, open the menu by pressing “space-m (dots
1-3-4).” Then, move to “paste” with “space-1” or “space-4,” and
press “enter.” You can also activate this function without calling up
the menu by pressing “enter-v (dots 1-2-3-6).” While pasting, you
will hear a sound that indicates that the Braille Sense Plus B32 is
working. If the file is larger than 300 KB, you will also hear the
progress meter each time an additional 10% has been completed.
If the file is less than 300 KB, then you will only hear the sound,
and not the progress meter.
5. When the file has been pasted successfully, you will see the
message, “xxx file pasted,” where xxx is the name of the file. If the
file is not pasted successfully, you will hear, “xxx file not pasted.”