User's Manual

259
move among the items in the folder list is the same as how to
move in the File Manager.
2. Press “space-m (dots 1-3-4)” to open the menu, and then use
“space-1” or “space-4” to navigate to “new folder,” and press
“enter.” Or, you can activate this function without calling up the
menu by pressing “enter-f (dots 1-2-4).”
3. You will then see an edit box that says, “new folder name:.” Type
in the new folder name using ASCII characters, and then press
“enter.” If the folder is created successfully, you will hear, “xxx
folder created,” where xxx is the name of the folder. You will then
be automatically returned to the list that you were in, whether it
was the remote or local folder list.
4. To cancel any changes that you made, press “space-z (dots 1-3-5-
6),” and you will be returned to the previous list.
12.2.3.5 Delete File/Folder
This function will allow you to delete files or folders in the remote or
local folder list. Note that if a folder contains folders, you will not be
able to delete the folder. To activate this function, perform the
following steps:
1. After you have connected to the FTP service, navigate to the local
or remote folder list, and select the file(s) or folder(s) that you want
to delete by pressing the “space” on them. The navigation keys
are exactly the same as when using the file manager. To
reference these keys, please refer to chapter 3 of this manual. You
can move to between “remote folder list” and “local folder list” by
pressing “enter-o (dots 1-3-5).”
2. Once you have selected the file(s) or folder(s), press “space-m
(dots 1-3-4),” and then use “space-1” or “space-4” to move to
“delete file/folder,” and press “enter.” You can also activate this
function without calling up the menu by pressing “space-d (dots 1-
4-5).”
3. If the file(s) or folder(s) is/are deleted successfully, you will hear,
“delete completed.”