User's Manual

260
12.2.3.6 Information
This function will allow you to check information regarding files or
folders that are located in the remote or local folder list. You can
activate this function by performing the following steps:
1. After you have connected to the FTP service, navigate to the local
or remote folder list, and select the file or folder that you want to
know information about. The navigation keys are exactly the same
as when using the file manager. To reference these keys, please
refer to chapter 3 in this manual.
2. Then, press “space-m (dots 1-3-4)” to open the menu, and then
use “space-1” or “space-4” to move to “information,” and press
“enter.” Or, you can activate this function without calling up the
menu by pressing “enter-i (dots 2-4).”
3. After you have activated the function, you will see the “information
dialog box,” which consists of “type,” “size,” “date,” “attribute,”
“confirm,” and “cancel.” You can move between these controls by
pressing “tab (space-4-5)” or “shift-tab (space-1-2).” If you select
multiple files, the “information” function will display the number of
selected files and size.
12.2.4 ActiveSync Service
This service works the same way as when you connect the Braille
Sense Plus B32 to a computer via a USB cable, and use ActiveSync.
If the connection succeeds when activating it by pressing “enter” on
ActiveSync, you will hear the sound that ActiveSync makes when
there is a successful connection. Just as with all of the Bluetooth
services, the remote Bluetooth device may need to authorize the
Braille Sense Plus B32. You will then be returned to the Bluetooth
Service list. Just like using ActiveSync via USB, you can copy and
paste files from the Braille Sense Plus B32 from the remote Bluetooth
device to the Braille Sense Plus B32 and visa versa.
If you want to disconnect the service, you can press “enter-d (dots 1-
4-5)” while in the Bluetooth Manager, and the Braille Sense Plus B32
will say, “service disconnected,” and you will be returned to the
Bluetooth Service list. You will no longer see the word “connected”
after ActiveSync in the Bluetooth Service list.