User's Manual

262
Bluetooth icon in the System Tray, you may have to change the
settings for the Bluetooth icon to appear. Go to the Windows
Control Panel, Bluetooth Devices, Options, and then check the
check box that says “Show the Bluetooth Icon in the Notification
Area.”
2. Press the “up or Down” Arrow keys until you get to "Open
Bluetooth settings."
3. Press “enter.”
4. Select the Device tab control. You may need to press Ctrl-Tab in
order to select this tab control.
5. Tab to the Add button.
6. Press “enter.”
7. Press “space” to check the checkbox for "My device is setup and
ready to be found."
8. Press enter.”
9. The XP machine will find the Braille Sense Plus B32, and it will be
called "Windows CE." Remember that the Braille Sense Plus B32
must be turned on in order to be found as mentioned above. If
you forgot to turn the Braille Sense Plus B32 on, leave it turned on,
exit the Bluetooth settings, and start at step number 1 above.
10. Press the “down arrow” key to focus Windows CE.
11. Tab to the Next button.
12. Press “enter.”
13. Press “down arrow” to focus the radio button, "Let me choose my
own passkey." Focus will automatically be put in the edit box, and
you may hear a tool tip that says, “We recommend using a
passkey that is 8 to 16 digits long.” You should type your passkey
here. For example, you might type, “1111.”
14. Press “enter.” Windows will then begin exchanging the passkeys,
and a new dialog will appear on the computer.
15. The Braille Sense Plus B32 will then ask for the passkey by saying,
“Computer Edit Box Pin Code?” Using the same passkey that was
typed in to the computer, type in the same passkey on the Braille
Sense Plus B32 and press “enter” on the Braille Sense Plus B32.
16. The computer will say the message, “Found new hardware” and
the final dialog should appear on the computer. Remember that
you can press “ctrl-shift-w” to have the entire dialog read using
Window-Eyes. The dialog should display that the Bluetooth device
was successfully set up. It is very important to note the COM ports
for the outgoing COM port and the incoming COM port. For