User's Manual

263
example, the outgoing COM port may be COM 5, and the
incoming COM port may be COM 6. Do not be surprised if your
COM ports are not set to COM 5 and COM 6. The COM ports
used can vary from computer to computer.
17. Press “tab” to get to the Finish button, and then press “enter” to
activate it.
18. You will then be taken back to the Bluetooth devices setting dialog.
Press Ctrl-Tab twice to focus the COM ports tab control.
19. Press “tab” to get to the list of COM ports, and then press the
Down Arrow to move through the list of COM ports to make sure
that they match the COM ports that were mentioned when you
completed the Bluetooth device wizard. You should hear your first
COM port, then the direction, and then the name. After you press
“down” Arrow again, you should hear the next COM port, the
direction, and name. For example, when you press the “down
arrow” key the first time, you might hear, "COM 5 Outgoing
Windows CE Blue Tooth Serial." When you press the “down
arrow” key a second time, you might hear, “COM 6 Incoming
WindowsCE.”
20. Tab to the OK button, and press Enter.
You have now setup the Braille Sense Plus B32 and the computer.
However, you must properly setup Window-Eyes in order to use
the Braille Sense Plus B32 as a Bluetooth Braille display.
12.2.5.3 Setting up Window-Eyes
1. Press “ctrl-backslash” to open the Window-Eyes Control Panel.
2. Press” alt-f” to open the File menu.
3. Press the “up arrow”, or “down arrow” to move to Select Braille
Display, and press “enter.” Or, just press B to open the Select
Braille Display dialog without using the Arrow Keys.
4. Press the “down arrow” or the letter “b” until you hear Braille
Sense Plus B32.
5. Press “tab” to get to the COM port list box
6. Select the COM port that was given as the outgoing COM port
when you setup the computer to interact with the Braille Sense
Plus B32 via Bluetooth.
7. Press “enter“