User's Manual

264
Now that you have set up Window-Eyes, you need to finish the setup
on the Braille Sense Plus B32.
12.2.5.3 Setting up the Braille Sense Plus B32
1. Press “f1” to get to the Program menu.
2. Press “space-1” or “space-4” to get to the Utility menu, or just
press the letter u.”
3. Press “enter.”
4. Press “space-1” or “space-4” to get to Terminal for Screen Reader,
and press” enter.”
5. Press “space-1” or “space-4” to get to Bluetooth Serial Port, and
press “enter.”
The Braille Sense Plus B32 should be connected as a Bluetooth
Braille display. To exit this mode from the Braille Sense Plus B32,
press “space-z.” Please note that “f1” on the Braille Sense Plus B32
will still take you to the Program menu. This is to allow you to use the
applications on the Braille Sense Plus B32 at the same time, and be
able to switch back to using the Braille Sense Plus B32 as a
Bluetooth Braille display.
12.2.6 Using Multiple Services Simultaneously
You can use the LAN, FTP, and ActiveSync Bluetooth services all at
the same time. However, if you plan to use any of these services at
the same time, you should connect the FTP service before
connecting the LAN and ActiveSync services. Otherwise, you may
experience problems. However, if you want to connect to the Serial
Port, you should not connect to any of the other Bluetooth services in
the Bluetooth Service list.
12.3 Hot keys in Bluetooth Manager
Scanning Bluetooth device: Enter-r (dots 1-2-3-5)
Connecting device: Enter on the device name
Connecting service: Enter on the service name
Disconnect service: Enter-d (dots 1-4-5)
Move to Bluetooth device list in service list: Backspace
Remove device setting in Bluetooth device list: Enter-s (dots 2-3-4)