User's Manual

291
via the calculator menu or you can use the hot keys depending on
which method works best for you.
All of these functions are explained in greater detail below.
15.1.1 General Functions
“General functions” is a dialog box that contains the “general function
list,” a “confirm” button, and a “cancel” button. In the dialog box, you
can navigate through the items with “tab (“space-4-5”)” and “shift-tab
(“space-1-2”)”. In the general function list, you can navigate the
operators using “space-1” or “space-4.” Or, in the list, you can press
the first letter of the operator that you want to go to. In the
“calculator,” you can open the menu by pressing “space-m (dots 1-3-
4)” or “F2,” and press “enter” on “general functions.” Or, you can
press “g (dots 1-2-4-5)” in the menu to access “general functions.”
After starting the calculation, 0 will be displayed in computer Braille.
On the calculation line, you can access the “general functions” by
pressing “enter-g (dots 1-2-4-5).” If the dialog box pops up first, you
will be placed on the general function list. Once in the list, you can
select what you want, and press “enter” on it to run the operator since
the default is set to the “confirm” button in the dialog. In the dialog
box, you can cancel the operator selection by pressing “enter” on
“cancel,” “space-z (dots 1-3-5-6),” or “space-e (dots 1-5).” You can
use hot keys of the operators for convenient access.
The hot keys of the operators are as follows:
Plus: dots 3-4-6
Minus: dots 3-6
Division: dots 3-4
Multiplication: dots 1-6
Percent: dots 1-4-6
Power: Backspace-4-5
Square Root: Enter-q (dots 1-2-3-4-5)
Decimal point: dots 4-6
Left parenthesis: dots 1-2-3-5-6
Right parenthesis: dots 2-3-4-5-6
PI: Enter-p (dots 1-2-3-4)
Exponential function: Enter-e (dots 1-5)