User's Manual

301
and a “cancel” button. You can move between each of these items
by pressing “tab (space-4-5)” or “shift-tab (space-1-2)”.
If you activate “set date and time” for the first time, you may see “time
zone? Pacific Time (US & Canada); Tijuana (GMPT-08:00)” which is
set as the default. In “time zone,” you can review the “time zone” list
by pressing “space-4” or “space-1,” or by typing in the first letter of
represented cities. If you selected one of the time zones, you can
move to the next item by pressing “tab (“space-4-5”)”,” or you can
move to the previous item by pressing “shift-tab (“space-1-2”)”.
The “use daylight savings” will display according to “time zone.”
Namely if daylight saving time is used in selected time zone, this item
will display. If not so, this item is not display. You can check and
uncheck this item by using “space.”
The next item is “time format,” where you can switch between 12 hour
and 24 hour time. You can toggle between which time to use with
“space-1” or “space-4.”
Once you select a time, you can move to the next “time” by pressing
“tab (“space-4-5”)”.” In “time,” you can set your time. If you select 12
hour clock in the “time format,” you can see A.M. or P.M. after the
hour and minute. In the 12 hour clock, you can set the time after
selecting A.M. or P.M. by pressing “space-x (dots 1-3-4-6).” In the 24
hour clock setting, you can type in a 24-hour-system number
regardless of A.M. or P.M. When you put numbers in the time, you
need to put a “space” or “: (colon)” between the hour and the minute.
To set your time, you can move to the date by pressing “tab (space-4-
5).” In the date, you should put in the month, date, and year in that
order. You should use a 2-digit number for the month, a 2-digit
number for the date, and a 4-digit number for the year while typing in
a “space” or “/ (slash)” between them. After you have completed the
necessary information, you can press “enter” on “confirm” by moving
with “tab (space-4-5),” and then you will return to “set date and time.”
Or, you can press “enter” when you have completed entering all of
the information because the default is set to “confirm.”