User's Manual

302
15.3 Check Date and Time
You can check the current date and time here. To activate this
function, press “space-4” or “space-1” in the “utility” menu, and then
press “enter” on “check date and time.” Or, you can activate this
function by pressing “d” in the menu. Anywhere in the Braille Sense
Plus B32, you can press “space-t (dots 2-3-4-5)” to check the time. If
you press “space-t (dots 2-3-4-5),” the Braille Sense Plus B32 will say
the time, and the Braille Sense Plus B32 will display the current time
in Braille. Then, if you press tab (“space-4-5”), the Braille Sense Plus
B32 will say and display today’s date.
15.4 Wake up alarm
If you have set up the “wake up alarm” function, an alarm will sound
on the Braille Sense Plus B32 at the specified time every day. If you
want to open “wake up alarm,” go to the “program” menu, move to
“utility,” and then press “enter.” Then, use the “space-1” or “space-4”
to find “wake up alarm,” and then press “enter” on “wake up alarm.” If
this is the first time you have opened “wake up alarm,” and you have
not yet set the time or date in the Braille Sense Plus B32, the Braille
Sense Plus B32 will then say, “set time:” After you set the time, the
Braille Sense Plus B32 will display the “wake up alarm” dialog box.
The Braille Sense Plus B32 will then say, “set time:” The “wake up
alarm” dialog box contains the following: “set time,” “bell,” “term,”
“alarm duration,” “repeat interval,” “wake up call times” a “confirm”
button, and a “cancel” button. You can move among these by
pressing “tab (“space-4-5”)” and “shift-tab (“space-1-2”)”. If you want
to check the wakeup call settings, open this dialog box again. It will
show you the current wakeup call settings. When the alarm sounds,
the Braille display on the Braille Sense Plus B32 will also display the
message “wake up alarm.” If you want to stop the alarm, press
“backspace-enter.” After you press “backspace-enter,” the Braille
Sense Plus B32 will remain on, even though the power switch is
turned to “off.” In order to turn the Braille Sense Plus B32 off, you
must turn the power switch to “on,” and then back to “off” after you hit
“backspace-enter.” Then, the Braille Sense Plus B32 will be turned
off, and the alarm will not sound again until you set it again. If you do
not plan on being able to turn the unit off and on, you should turn on