User's Manual

303
the “power saving mode” in the “option” menu (as explained in
section 2.4) to avoid draining the battery.
15.4.1 Set Time
When you open the “wake up alarm” dialog box, the Braille Sense
Plus B32 will display the “set time” field. The value is set to the
current time or the time specified previously. Here you can directly
type in the time, or set the time using the shortcut keys, as explained
in section 6.3. After you set the time, you should press “tab (“space-
4-5”)” to move to the next field. While you are anywhere in the Braille
Sense Plus B32, you can check the time by pressing “space-t (dots 2-
3-4-5)” to check the time.
15.4.2 Alarm Sound
You can select an alarm sound for the wake up alarm. If you press
“tab (“space-4-5”)” on “set time,” you will hear the alarm sound that is
currently set. Press “space-1” or “space-4” to change the alarm
sound, and you will hear the different alarm sounds. Select one of
the three alarm sounds that are available. If you have selected the
sound that you want, press “tab (space-4-5)” to move to the next field.
15.4.3 Term
In this field, you can set which day of the week the alarm will go off.
There are four options: “off,” “once,” “week days,” and “every day.”
Move between these options by pressing “space-1” or “space-4.” If
“term” is set to “off,” the alarm will not go off at the specified time at all.
If “term” is set to “once,” the alarm will go off only once. If “term” is
set to “week day,” the alarm will go off at the same time every
weekday, Monday through Friday. If “term” is set to “everyday,” the
alarm will go off at the specified time 7 days a week, even on
weekends. When you have selected the option you like, press “tab
(“space-4-5”)” to move to the next field.
15.4.4 Ringing Duration
This option sets the amount of time that the alarm will sound. The
options are 1 minute, 2 minutes, or 3 minutes. Move between these