User's Manual

304
options by pressing “space-1” or “space-4.” If you set the ringing
duration to “1 minute,” the alarm will sound for one minute, and then
the alarm will be silent. To stop the alarm, press “backspace-enter.”
15.4.5 Repeat Interval
This option sets the amount of time that will be between the times
that the alarm sounds. For example, after the alarm has stopped
sounding, it will ring again in 3 minutes, if you set the repeat interval
to three minutes. The available settings are 1, 3, 5, 10, 15, or 20
minutes. Move between these options by pressing “space-1” or
“space-4.”
15.4.6 Wakeup Call Times
This option allows you to decide how many times the alarm will sound.
The available settings are anywhere from 1 to 10 times. For example,
if the alarm is not turned off by pressing “backspace-enter,” it will
repeat according to the number of times that you set for this option.
Move between these options by pressing “space-1” or “space-4.”
15.4.7 Confirm Cancel
If you press “enter” on the “confirm” button, the changed options will
be saved, and the dialog box will be closed. If you do not want to
save the changes you have made, press “enter” on the “cancel”
button. The Braille Sense Plus B32 will keep the previous “wakeup
call” settings, and close the dialog box.
15.5 Calendar
You can activate the calendar by pressing “enter” on “calendar” in the
“utility” menu, or by pressing “l (dots 1-2-3).” The following options
will be available when you are using the calendar. “solar calendar,”
“lunar calendar,” and “day of week.” In the calendar, you can check
the three kinds of information starting from the year 1841 to the year
2043. If you type in a date that is not in the range and press “enter,”
you will get the message, “invalid date,” and return to where you
where you were typing in the date.