User's Manual

308
If you press “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” before the
start of the stopwatch or while it is running, you can switch to the
“count down timer.” If you activate the “count down timer,” you will be
asked to put in hours, minutes, and seconds. When typing in the
hours, minutes, and seconds, you should type in a two-digit number
for the hour, minute and the second, regardless of whether you are
using computer Braille or regular grade 1 Braille without using a
number sign. If you press “enter” without typing in any numbers, the
“count down timer” will start with the default, which is set to one
minute. When started, the “count down timer” will display “count
down xx minute,” and it will start running. If you press “enter” in the
“count down timer,” the Braille Sense Plus B32 will tell you the
remaining time, and then it will pause. If you press “enter” again, it
will restart. Pressing “backspace” will initialize the “count down
timer.” If the timer reaches zero, you will hear a 10-second alarm,
and the “count down timer” will initialize. If you press “backspace-
enter” while the alarm is sounding, the alarm will stop and your timer
will initialize, and will be ready to accept a new time.
If you press “tab (space-4-5)” or “shift-tab (space-1-2)” again
anywhere in the count down timer, the stopwatch will be ready. If you
want to exit the stopwatch or “count down timer,” press “space-z (dots
1-3-5-6)” anywhere within the stopwatch or “count down timer,” and
you will return to the “stopwatch” menu.
15.8 Terminal for Screen reader
The “terminal for screen reader” function allows the Braille Sense
Plus B32 to be used as a Braille display when hooked up to a
computer that uses a compatible screen reader such as Window-
Eyes, JAWS or Supernova. Before using this function, make sure
that the Braille Sense Plus B32 is connected to your personal
computer via a serial cable, bluetooth serial or to the USB client port.
To turn on this function, go to the “utility” menu, and press “enter.”
Then, press “space-4,” until you hear “terminal for screen reader.”
Then, press “enter.” If you activate “terminal for screen reader,” you
will see the list of connection methods. In the list, you will see “serial
port,” “bluetooth serial port” and “USB port.” Press “space-1” or
“space-4” until you reach what you want to select. If you have