User's Manual

309
selected one, press “enter” and you will hear “terminal mode.” The
Braille Sense Plus B32 will no longer say anything, as it is now simply
acting as a Braille display for your computer. If you fail to connect,
you will be returned to the list of connection methods.
For information and support files on connecting the Braille Sense
Plus B32 to the USB port with Window-Eyes see:
GWKB1043 - Configuring the Braille Sense Plus B32 to Work as a
Braille Display via the USB Port
http://www.gwmicro.com/Support/Knowledge_Base/?kbnumber=GW
KB1043
For information and support files on connecting the Braille Sense
Plus B32 to the USB port with JAWS see:
GWKB1046 - Using the Braille Sense Plus B32 as a Refreshable
Braille Display with JAWS
http://www.gwmicro.com/Support/Knowledge_Base/?kbnumber=GW
KB1046
For more information on Bluetooth, refer to Section 13.
15.9 Setup Internet
The “setup Internet” function is used to set up your IP configuration.
In “setup Internet,” you will find “LAN,” “modem,” “ADSL,” “Bluetooth
DUN” and “wireless LAN.” You can move between the four items by
pressing “space-4” or “space-1.” The “LAN” setup should be used if
you are connecting to the Internet via a network or router. The
“modem” setup should be used if you are connecting to the Internet
via a dial-up modem. The “ADSL” setup should be used if you are
connecting to the Internet via a DSL modem. To connect to the
Internet via a wireless network, use the “wireless LAN” function.
If you want to activate “setup Internet,” press “enter” on “setup
Internet” in the “utility” menu, or press “I (dots 2-4)” in the “utility”
menu. You can move through the “utility” menu items with “space-1”
or “space-4.”
If you want to access to Internet with the Braille Sense Plus B32, you
must set the Internet settings at “setup Internet” that is one of the
submenus of “utility” menu.