User's Manual

312
the “connect list” directly. “Modify” has the same items as “register,”
and you use the menus in the same way.
In “delete,” if you want to delete an item, you can move to what you
want to delete in the “connect list,” and then press “enter” on “delete.”
Use “tab (“space-4-5”)” to move between the items. Or, you can
delete an item by pressing “space-d (dots 1-4-5)” on what you want to
delete in the “connect list.”
If you want to exit the “modem setup,” you can press “space-z (dots
1-3-5-6),” or you can press “enter” on “close” by moving to it by
pressing “tab (“space-4-5”)”.
15.9.3 ADSL Setup
If you want to connect the Braille Sense Plus B32 to the Internet via a
DSL connection, you should use the ADSL setup. First, you should
plug in a LAN cable to the Braille Sense Plus B32’s LAN port. If you
press “enter” on “setup internet,” you will first see “CB LAN 1/5.”
Then, go to ADSL by pressing “space-4” repeatedly. Press “enter” on
“ADSL.” It contains the following controls: connect list, default,
register, modify, delete, and close. You can move between the
controls by pressing “tab (“space-4-5”)” or “shift-tab (“space-1-2”)”.
Within each control, you can move item by item by pressing “space-4”
or “space-1.”
In the “connect list,” you will see the registered connect names.
Select one by pressing “enter” on it. In “default,” you can make one
of the registered connect names the default connection. If you make
a connection the default connection, that will be the connection that is
used to connect to the Internet first. In “register,” you can manage
the connect names in the list. It has three controls: edit field, a
confirm button, and a cancel button. You can move between the
three controls by pressing “tab (“space-4-5”)” or “shift-tab (“space-1-
2”)”. The edit field contains the following: connect name, ID, and
password. You can move between the controls by pressing ‘”space-
4” or “space-1.” When in the “connect name” control, type in the
server host name. In “ID” and “password,” you can type in what you
want in ASCII. After completed filling in the appropriate information,
press “enter” or press “enter” on “confirm” after pressing “tab (“space-