User's Manual

369
20. Troubleshooting Guide
If you are having trouble with the Braille Sense Plus B32, please try
the following suggestions according to your problem:
20.1 The Braille Sense Plus B32 Will Not Turn On
1) Check to make sure that the battery is inserted in to its
compartment properly.
2) If the battery is inserted properly, connect the AC adapter, and
plug the AC adapter in to an electrical outlet. The battery may
need to be charged.
3) Or, Check the location of keyboard lock switch. If this switch put on
“lock,” power switch does not work.
20.2 The Voice Cannot Be Heard
1) Make sure the volume is turned up. Press “backspace-F4” to turn
up the volume.
2) Make sure the voice is turned on. Press “space-o (dots 1-3-5)” to
open the “option” menu. Press “F3-F4” once. Then, press
“space.” Then, press “enter.” This will turn on the voice.
20.3 The Voice is Too Fast to Understand
1) Press “space-F1” to slow down the voice rate.
20.4 The Voice Tone Is Too Low or Too High to Understand
1) Press “enter-F1” to lower the tone, or press “enter-F4” to raise the
voice tone.
20.5 Lost Your Place
1) If you have lost your place in the Braille Sense Plus B32, and
cannot remember where you are press “F1” to access the
“program” menu. Then, press “F2-F3” to switch between
programs that are open. If you are in the word processor, pressing
“space1-5-6” will give you your current location.