User's Manual

2.4.2.5 Message Display Time

You can choose when a Braille message will disappear from the

Braille display. This setting will only work when the voice setting is

set to “off.” The shortcut key is “m (dots 1-3-4).” The setting options

that you can choose from are “standby,” ”ignore”, and 1 to 10

seconds. The default is “3 seconds.” The “space” key increases the

option by one second and the “backspace” key decreases the option

by one second. You can set the unit to standby mode by pressing

the “space” key until you reach “stand by.” In this mode, the message

will remain until you press a key. The higher value you select, the

longer the message remains. If you read the message before setting

the number of seconds, you can clear the message by pressing any

key. If you choose “ignore,” then messages will be ignored and won’t

show on the display. If you have changed the setting, press the

“enter” key to save the setting. You can also “tab (“space-4-5”)” or

“shift-tab (“space-1-2”)” to the “confirm” button, and press “enter.” If

you do not want to save the setting, “tab (“space-4-5”)” or “shift-tab

(“space-1-2”)” to the “cancel” button, and then press “enter.” You can

also cancel saving the setting by pressing “space–z (dots 1-3-5-6)” or

“space-e (dots 1-5).”

2.4.2.6 Voice

This menu will allow you to turn the Braille Sense Plus B32 voice on

or off. The shortcut key is “v (dots 1-2-3-6).” By default the voice is

set to on, so you will hear the Braille Sense Plus B32 speak. You can

turn off the voice with the ‘”space” key. You can toggle it on and off

by pressing “backspace-F2” while you are using another program in

the Braille Sense Plus B32 without having to call up the “option”

menu. If you have changed the setting, press the “enter” key to save

the setting. You can also “tab (“space-4-5”)” or “shift-tab (“space-1-

2”)” to the “confirm” button, and press “enter.” If you do not want to

save the setting, “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the

“cancel” button, and then press “enter.” You can also cancel saving

the setting by pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-

5).”

You can also press “dots 1-2” while turning on the Braille Sense Plus

B32, which will turn the Braille Sense Plus B32 on without speech.

When resetting the Braille Sense Plus B32, you can also press “dots