User's Manual

1-2” when you press the reset button to reset the Braille Sense Plus

B32, and turn on the Braille Sense Plus B32 without speech.

2.4.2.7 Punctuation Level

You can choose how you want the Braille Sense Plus B32 to read

punctuation marks. The shortcut key is “p (dots 1-2-3-4).” The

setting options are “all,” “off,” “punctuation,” and “symbol.” The

default setting is set to “all” in which the Braille Sense Plus B32 will

say all punctuation marks and symbols. The “space” key allows you

to cycle through all four of the setting values. If you select “off,” the

Braille Sense Plus B32 will not say any punctuation marks. The

option, “punctuation” will make the Braille Sense Plus B32 say only

punctuation marks, but the “symbol” option will say all symbols

without saying punctuation marks. If you have changed the setting,

press the “enter” key to save the setting. You can also “tab (“space-

4-5”)” or “shift-tab (“space-1-2”)” to the “confirm” button, and press

“enter.” If you do not want to save the setting, “tab (“space-4-5”)” or

“shift-tab (“space-1-2”)” to the “cancel” button, and then press “enter.”

You can also cancel saving the setting by pressing “space–z (dots 1-

3-5-6)” or “space-e (dots 1-5).”

2.4.2.8 Keyboard Echo

With this option, you can decide how the Braille Sense Plus B32 will

speak when you are typing. The shortcut key is “k (dots 1-3).” The

setting values are “on with characters and words,” “on with

characters,” “on with words,” and “off.” If you select the default “on

with characters and words,” you can hear each keystroke and a word

right after it is completed. If you select “on with characters,” you can

hear each keystroke letter by letter. If you select the “on with words”

option, you can hear each word right after it is completed, but not

each letter. You can cycle through each of the options by pressing

the “space” key. If you have changed the setting, press the “enter”

key to save the setting. You can also “tab (“space-4-5”)” or “shift-tab

(“space-1-2”)” to the “confirm” button, and press “enter.” If you do not

want to save the setting, “tab (“space-4-5”)” or “shift-tab (“space-1-

2”)” to the “cancel” button, and then press “enter.” You can also

cancel saving the setting by pressing “space–z (dots 1-3-5-6)” or

“space-e (dots 1-5).”