User's Manual

2.4.2.9 Capitalization alert

You can decide how the Braille Sense Plus B32 will speak the

"capital character" when you type the character or read the document

by using "space-3" or "space-6" in computer edit box or ASCII mode .

The shortcut key is “u (dots 1-3-6).” The setting values are “off,” “say

cap,” and “pitch.” The default value is “off.” If you select the default,

read the same regardless of capital letter and lower case letter. And

if you select the “say cap,” you will hear “cap” sound before the

capital letter. For example, when you meet the capital letter “V,”

Braille Sense Plus B32 will talk “cap v.” And if you select the “pitch,”

you will hear higher tone when meet the capital letter.

You can cycle through each of the options by pressing the “space”

key. If you have changed the setting, press the “enter” key to save

the setting. You can also “tab (“space-4-5”)” or “shift-tab (“space-1-

2”)” to the “confirm” button, and press “enter.” If you do not want to

save the setting, “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the

“cancel” button, and then press “enter.” You can also cancel saving

the setting by pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-

5).”

2.4.2.10 Numbers

You can choose how you want the Braille Sense Plus B32 to read

number. The shortcut key is “n (dots 1-3-4-5)” with the default set to

“on.”

For example, if you set “on,” the “2007” will read “two thousand

seven.” And you set “off,” “the “2007” will read “two zero zero seven.”

You can change the value by using “space.”

If you have changed the setting, press the “enter” key to save the

setting. You can also “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to

the “confirm” button, and press “enter.” If you do not want to save the

setting, “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the “cancel”

button, and then press “enter.” You can also cancel saving the

setting by pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-5).”

2.4.2.11 Voice Volume

You can set the volume level of the voice on the Braille Sense Plus

B32. The shortcut key is “l (dots 1-2-3).” The setting value is 1