User's Manual

2.4.2.25 Hot Key Information

As described before, hot keys are keystrokes that can take you

directly to an item, such as a menu, or a particular item in a list.

You can choose the speech output method of hot key. The short cut

key is “h (dots 1-2-5),” and the default is set to “ASCII character.” The

setting values are “ASCII character,” “dot patterns,” and “off.” You

can cycle through each of the options by pressing the “space” key.

For example, when you select “ASCII character,” the “open (o) enter-

o” will output with “open (o) enter-o.” And if you select “dot patterns,”

the “open (o) enter-o” will out put with “open (o) enter dots 1 3 5.”

And if you select “off,” you can’t hear the hot key information.

If you have changed the setting, press the “enter” key to save the

setting. You can also “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to

the “confirm” button, and press “enter.” If you do not want to save the

setting, “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the “cancel”

button, and then press “enter.” You can also cancel saving the

setting by pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-5).”

2.4.2.26 Announce shortcut keys

The “announce shortcut keys” option allows you to decide if the

Braille Sense Plus B32 will say the shortcut key for a function. The

shortcut key is “s (dots 2-3-4)” and the default is set to “on.”

For example, if you hear, “file f pull down,” the shortcut key is the

letter “f.” If you prefer the Braille Sense Plus B32 only says, “file pull

down,” you will want to turn the “announce shortcut keys” setting off.

To toggle “announce shortcut keys” between on and off, press

“space.”

If you have changed the setting, press the “enter” key to save the

setting. You can also “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to

the “confirm” button, and press “enter.” If you do not want to save the

setting, “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the “cancel”

button, and then press “enter.” You can also cancel saving the

setting by pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-5).”

2.4.2.27 Power Saving Mode

You can choose to have the Braille Sense Plus B32 use the power

saving mode. The shortcut key is “p (dots 1-2-3-4).” The default