User's Manual

32
messages, the word processor, etc. The short cut key for this option
is “c (dots1-4).”
By default this setting is set to “off” which will not check your spelling.
If you want to check spelling, press “space” to toggle the option to
"on” and press “enter.” Or, press “tab (space-4-5)” to move to the
“confirm” button, and press “enter.”
If you set the option to “on" and enter a misspelled word, you will hear
a beep sound. You will hear a beep sound, even though you shut “off”
the warning message discussed in section “2.4.2.20.”
If you do not want to save the changed setting, press “tab (space-4-
5)” to move to the “cancel” button, and press “enter.” You can also
cancel saving the setting by pressing “space–z (dots 1-3-5-6)” or
“space-e (dots 1-5).”
2.4.2.32 Default Document
This function is used to set the default document type applied when
you create a new document using the word processor on the Braille
Sense Plus B32. The shortcut key for this option is “q (dot 1-2-3-4-5)”.
When you create a new document in the “word processor”, “Braille
document” (.brl file) is selected as the file type by default. You can
change the default setting using this option.
You can choose between “sense document”, “Braille document,” and
“text document”. By default, it is set to “Braille document.” Press
“space” to toggle through the three settings, and press “enter,” or
press “tab (space-4-5)” to move to the “confirm” button, and press
“enter,” to save the changed setting.
If you do not want to save the changed setting, press “tab (space-4-
5)” to move to the “cancel” button, and press “enter.” You can also
cancel saving the setting by pressing “space–z (dots 1-3-5-6)” or
“space-e (dots 1-5).”
For your reference, this option is set to “text document” even if you
are set to “sense document” or “Braille document” when connected
the Braille Sense Plus B32 to USB keyboard. And if you remove the
USB keyboard, this option will be returned to value that before you
connected to the USB keyboard.