User's Manual

37
The flash memory in the Braille Sense Plus B32 is similar to a big
bookshelf in a library. The piece of hardware in the Braille Sense
Plus B32 that is called the “disk” is similar to the idea of a bookshelf
in a library. You can make partitions on a bookshelf in order to
organize books into categories. Each category can be compared to
what are called “folders” on the Braille Sense Plus B32. The books in
each section can be compared to what are called “files” on the Braille
Sense Plus B32. You can save files into any folders at your
convenience. If you make the proper folder names for files you are
saving, it will make it easier to find saved files when you need to
access them later.
When the Braille Sense Plus B32 is shipped from the factory, the
name of the flash memory in the Braille Sense Plus B32 is called
“flashdisk.” You can create folders on this “flashdisk” in any way that
you prefer.
You can also expand your memory space by adding additional
memory devices, such as a floppy disk drive through a USB port,
USB stick memory (also known as a USB flash drive), or a compact
flash memory card in the CF slot. The default name of the floppy disk
drive is “FDD” and the name of the CF card is “CFD.” The USB stick
memory is called “SMD.” If you decide to add any of these memory
devices, you will be able to create folders, and save files on the
additional memory devices.
2.7 Controlling the Volume, Speed, and the Tone of Speech
You can change the volume, speed, and tone of speech used on the
Braille Sense Plus B32. To change the volume, you can press
“backspace-F4” to raise the volume. Press “backspace-F1” to lower
the volume. To make changes in the reading speed, you can press
“space-F4” to make the reading faster. Press “space-F1” to make the
reading speed slower. In order to make changes in tone, press
“enter-F4” for a higher tone and “enter-F1” for a lower tone. When
any of the above combination keys are pressed, the Braille Sense
Plus B32 will announce the status of its volume, speed, or tone. The
changes you made with these combination keys will remain in effect
even when you turn off the machine and turn it back on again. These
changes can also be made in the “option” menu settings. Please