User's Manual

42
space-F3).” Switching documents will be explained later in detail in
section 4, which covers the word processor.
After you press F1 to call up the “program” menu, or after you press
F1-F4 to open the Task ID, you can press “escape” (“space-e” or
“F4”) to return to the previously-running program.
If you want to switch between programs while running more than one
program, press the “F1” and “F4” keys at the same time to open the
Task ID. The Task ID shows the names and numbers of the running
programs, just like the file manager. You can cycle through the
running programs on the Braille Sense Plus B32 with the “space-1” or
the “space-4” and scroll buttons. Press the “enter” key to run the
program that you want after focusing on your selection.
The combination of the “F2” and “F3” keys can switch between all of
the running programs immediately without opening the Task ID. It
functions the same way as the “alt-tab” keys on your PC. If you are
running three programs and you are in the second program, pressing
the “F2” and “F3” keys at the same time will move you to the third
program. If you press “F2-F3” again, you will be on the first program.
In the above case, pressing “space-z (dots 1-3-5-6)” will close the
current running program and move you to the previous program.
However, if there is only one program running, pressing “space-z
(dots 1-3-5-6)” will close the program and move you to the Braille
Sense Plus B32 “program” menu. Note that “space-z (dots 1-3-5-6)”
is different from the “escape” key, which does not close programs.
2.11 Switching Audio mode
The audio buttons on the front panel will work for different function
according to the location of Audio mode switch.
If you push the audio mode switch to the left side, the Braille Sense
Plus B32 will say “radio mode” and the audio buttons will work for the
Radio program.
If you set the audio mode switch to the center, the Braille Sense Plus
B32 will say “daisy mode” and the audio buttons will work for the
Daisy program.
If you push the audio mode switch to the right side, the Braille Sense
Plus B32 will say “media mode” and the audio buttons will work for
the Media program.