User's Manual

66
that has the extensions hbl or brl, or if you type in a file name with
those extensions and press “enter,” the Braille Sense Plus B32 will
open the selected file in Grade 2 Braille. You will not be able to
change the Braille mode in these documents. If you press “enter” to
select a file that has the extensions of txt or doc, it will open the file in
what is currently set in “view/input grade” of “option menu.” After the
file opens, you can switch the Braille mode, as was explained in
section 2.4.2.4. If you press “enter” at the other file format, you can
select the file format; Braille format, or text format. You can toggle
between “Braille format” and “text format” by pressing the “space”
key. Press “enter” when the desired format is displayed. If the Braille
format is selected, the document will be opened in Braille grade
2. And, if the text format is selected, the document will be opened in
Braille mode that is currently set in “view/input grade” of “option
menu.”
In the word processor of the Braille Sense Plus B32, it is possible to
open and work simultaneously with up to 10 files at one time. If you
already have one document open, and you try to open another
document, the Braille Sense Plus B32 will ask you if you want to save
changes to the document that is already open. Then, you can save
the file (see section 4.1.3 for a detailed explanation). Once you have
completed saving the document, an open dialog box will appear.
However, you will still have the two files open. It only seems that you
closed one without saving it. With the new document open, if you
want to go to the previous document, you can press “shift-tab (space-
1-2).” If you want to go back to the other document again, press “tab
(space-4-5).”
4.1.3 Save
The save command will save a document to a disk drive. If you want
to use this option, you can press “space-m (dots 1-3-4)” to open the
“file” menu and execute the “save” command by pressing “enter” on it,
or you can press “s (dots 2-3-4).” Otherwise, you can press “enter-s
(dots 2-3-4)” while editing a document.
If you created a new document by activating the word processor or by
pressing enter on “new” in the menu; if you execute “save,” the “save