User's Manual

67
as dialog box” will open. You can refer to section 4.1.4 that explains
how to use the “save as” dialog box.
If you execute “save” after you edit a document that was opened
using the “open” function, the Braille Sense Plus B32 will save the
document with the same file name without using a dialog box. After
saving a document, it will return to document edit status.
When you have several documents open, you can save the current
open document, by pressing “space-q (dots 1-2-3-4-5).” This will
close the document, save it, and return to the previous document.
4.1.4 Save As
The “save as” option is used to save a document as a different file
name, on another disk drive, or as a different file type. If you want to
execute this command, press “space-m (dots 1-3-4),” and then press
“enter” when the “file” menu is displayed. Move to “save as” by
pressing “space-4.” Then, press “enter.” Another way is to press
“space-s (dots 2-3-4),” which executes the “save as” command in the
word processor.
If you execute “save as,” the “save as” dialog box is displayed. This
dialog box is almost the same as the “open” dialog box. It consists of
“file list,” “file name,” “type” (representing the file format), a “confirm”
button, and a “cancel” button. If the dialog box is opened, “file name:”
is displayed. You can move from one tab to the other tab by pressing
“tab (“space-4-5”)” or “shift-tab (“space-1-2”)”.
If you execute “save as” when you are editing a document that you
opened, the displayed file name, file format, and the folder are the
same as those of the file that you opened.
However, if you created a new document by executing the word
processor or by executing “new,” and you execute “save” or “save
as,” the displayed default file name is “noname.brl” and the file path is
“flashdisk/work/.”
If you want to edit the file name that is displayed on the Braille display,
press the cursor routing key where you want to edit the file name, and
then modify it. Or, if you want to make a new file name, type in the