User's Manual

69
1) Embossing in Braille
Open the document that you want to be embossed. Press
“space-m (dots 1-3-4)” to activate the menu. Locate “print” in the
“file” menu and select “embosser,” or press “b (dots 1-2).” If you
select “embosser (b)” above, the “embosser” dialog box is
opened. Here you can type in the page number where you want
the embossing to start, and type in the end page number, where
you want the embossing to stop. The following items are in the
dialog box.
(1) Start page number
This is the beginning page number to be embossed. The
default page number is set to 1. You can change the value of
the page number, by typing in the value that is desired. You
can move to the next selection item, which is the “end page
number” by pressing “space-4.”
(2) End page number
This is the ending page number that is to be embossed. The
default value is set to 100000. It means that the document
will be embossed to the end of the document, unless the
document exceeds 100000 pages. In order to change the
value, input the number of the ending page. You can move to
the next selection item (which is the “number of copies”) by
pressing “space-4.”
(3) Number of copies
This option designates the number of copies to be embossed.
The default value is set to 1. You can change this number by
typing in the number that is desired. If you press “space-4” or
“space-1,” you will be moved to “start page number” or “end
page number,” respectively. If you want to move to “confirm,”
press “tab (“space-4-5”).”
(4) Set Braille format
In this option, you can set whether or not the Braille document
layout settings specified in Braille Sense Plus B32 will be
used when embossing. If you set this to “yes,” the document
will be embossed using the Braille document layout setting in
Braille Sense Plus B32. If you set it to “no,” the document will
be embossed in the format specified in the original document.
(5) Confirm / Cancel