User's Manual

70
In order to emboss as designated above, move to “confirm”
by pressing “tab (“space-4-5”),” and then press “enter.” Or, if
you are canceling embossing, move to “cancel” by pressing
“tab (“space-4-5”)”, and then press “enter.”
If “enter” is pressed on “confirm,” “Print: Yes” is displayed on
the Braille display and it is also spoken. If “enter” is pressed
on “yes,” embossing will start. If you do not want to emboss,
press “space” to select “no,” and then press “enter.” If “save
as file” is selected by pressing “space,” then the current
document is saved as a “brl” file.
If there are any problems with the Braille printer, the Braille
Sense Plus B32 shows an error message and returns to the
open document.
2) Print Text
This option is used when you want to print a document on an
ink printer. To do so, open the document to be printed and
press “space-m (dots 1-3-4)” or “F2,” and then press “enter”
on the “file” menu. Move to “printer” by pressing “space-4”
repeatedly. Then, press “enter” when you are on “printer,” or
just press “p (dots 1-2-3-4).” The dialog box for “printer” is
almost the same as “embosser.” After you input the value as
in embosser dialog box, press “tab (“space-4-5”),” and then
“Print: Yes” is displayed. If “enter” is pressed, printing will
start. But, if you press “space” to move to “no,” and press
“enter,” printing will be canceled, and the Braille Sense Plus
B32 will return you to the open document.
Note that the Braille Sense Plus B32 will work with all HP printers
(level 3 PCL or higher), and with HP-compatible printers.
4.1.7 Settings
If you want to change the environment, press “space-m (dots 1-3-4)”
or “F2,” and press “enter” on the “file” menu in order to enter into the
“file” menu. Move to “settings (e)” by pressing “space-4” repeatedly,
and then press “enter” on “settings,” or just press “e (dots 1-5).”