User's Manual

While editing a document, pressing “enter-e (dots 1-5)” will open the

“settings” menu.

When this menu is opened, a dialog box is displayed. You can move

between the menu items by pressing “space-1” or “space-4.” To

make a change for one of the settings, press “tab” (“F3 or space-4-5”)

and press “enter” on “confirm” or “cancel.” The following are the

menu items that can be changed:

1) View format character (yes/no): If this option is set to “yes,” all of

the format characters are displayed. If you want to change this

option, use “space” to toggle. Formatted characters will be

marked with the “carriage return ($p)”, “auto return ($l)” and the

“mark sign ($pl).”

2) Reading unit (line/paragraph): It sets the moving unit when

“space-1” or “space-4” is pressed while you are reading a

document. If this option is set to “line,” “space-1” moves line by

line. If this option is set to “paragraph,” “space-1” moves

paragraph by paragraph. In order to toggle between “line” and

“paragraph,” press “space.”

3) Read only (yes/no): If this option is set to “yes,” the document

cannot be modified. This setting is used in order to protect the

document from any unintentional modifications. If you want to

change it to “no,” press “space.”

Note that when you choose to select “compressed” on the option

for reading with the Braille display, you set “read only” to “yes.”

When you are reading a document pressing a “cursor routing key”,

will show a word or character corresponding to the operation of

the “cursor routing key.” This will be displayed at a very left of the

32-cell Braille display.

4) Reading mode (original or compressed): This option sets the

reading mode. Reading mode “original”, will show the document in

its original format.

If the Reading mode is set to “compressed”, The Braille Sense

Plus B32 will continue displaying contents even if there exists a

carriage return ($p). In order to toggle between “original” and

“compressed,” press “space.”

5) Auto scroll speed (1~20): This option sets the duration of

displaying one line while you are scrolling in a document. Twenty

is the fastest scrolling speed. Pressing “space” makes the number