User's Manual

77
want to change after completing the “insert date” command. When
you are editing a document, you should press “enter-w (dots 2-4-5-6)”
to activate this command.
4.2.12 Changing Between Insert and Overwrite Mode
There are two ways of editing documents in the Braille Sense Plus
B32. The first is to insert your text, which will push back the words
behind the cursor. This is called the “Insert mode” because you are
simply inserting text. When you are in “Insert mode,” the cursor will
show up “dots 7-8.” The second is to overwrite text at the cursor
location. This is called the “Overwrite mode.” In “Overwrite mode”,
the cursor will display as blinking “dots 7-8.”
If you start the word processor (or open a document), the “insert
mode” is the default. This will write text, while pushing back other
words that are already in the document. However, you can overwrite
text while erasing the old text by switching to “overwrite mode.” You
can switch to the “overwrite mode” by pressing “space-I (dots 2-4).”
In the “overwrite mode,” you can change the old text into new text at
the cursor location. If you want to go back to “insert mode,” you
should press “space-I (dots 2-4)” again. You can also access this
function via the menu. Press “space-m (dots 1-3-4)” or “F2,” and go
to “edit” using the arrow keys (“space-1” and “space-4”). Next, press
“enter” on “edit” to enter in to the “edit” menu. Then, use the arrow
keys to scroll to find “toggle insert/overwrite mode,” or you can just
press “m (dots 1-3-4)” while you are in the “edit” menu.
4.2.13 Check Spelling
This option is used to check spelling while you are editing a
document
In order to bring up check spelling option, do the following;
1. Call up the menu by pressing “space-m (dots 1-3-4)” or “F2.”
2. Move to the “edit” menu by pressing “space-4.”
3. Press “enter” on the “edit” menu.
4. Press “space-4” until “check spelling” is displayed. Or, press “k
(dots 1-3)” in order to move to “check spelling” directly.