User's Manual

can skip an item by pressing “Down arrow key” if you don’t want to

change the default setting.

The following are the items that can be changed:

1. Set characters per line

This sets the number of characters (Braille) per line to emboss in

Braille. The default value is set to 32. Type in the number of

characters per line, if you decide you want to change the value.

Then, you can move to the next setting by pressing “Down arrow key.”

2. Set lines per page

This sets the number of lines per page to be embossed. It includes

the line that the page number is printed in. For example, if it is set to

26, the content of the document will be embossed with 25 lines and

the page number is printed as the 26th line. If you want to change the

value, type in the number of lines that you want to emboss. Then, you

can move to the next setting by pressing “Down arrow key.”

3. Print type

This sets whether the document will be embossed on a single sided

or a double sided (both sides). The default value is set to double side

embossing. If you want to emboss using single sided embossing,

press “Space” until “Print type: Single sided” isheard. Then, the

setting will be changed to single side embossing. If you want to go

back to double side printing again, pressed “Space” again, and “Print

type: Double sided” will be displayed. After setting your preference,

move to the next setting by pressing “Down arrow key.”

4. Page numbering type

This sets the numbering type for embossing a document. The

default type is set to “Double sided.” It means that the page number

will be embossed on every page. The setting values are “Double

sided,” “Odd,” “Even,” and “None.” These settings are changed when

you press “Space.” Pressing “Backspace” will allow you to move in

reverse order. When you have selected your preference, you need to

press “Down arrow key” in order to move to the next setting.

5. Set page numbering

This sets the position of the page number when embossing. The