User's Manual

97
selections are “Upper right” and “Lower right.” The default setting is
set to “Lower right.” Press “Space” in order to change the setting.
Pressing “Backspace” will allow you to move in reverse order. After
selecting your preference, you should press “Down arrow key” in
order to move to the next setting.
6. Header
This is used to edit the header that will be embossed on the head of
every page. Move to “Header” and type in the text to be embossed as
the header. In order to move to the next setting, press “Down arrow
key.”
7. Footer
This is used to edit the footer that will be embossed on the bottom of
every page. Move to “Footer” and type in the text to be embossed as
the footer. After you set every field, move to “Confirm” or “Cancel,”
and press “tab.” If you want to change a setting or check your settings
again, press “Up arrow key” to move to the previous fields.
8. Confirm / Cancel
In order to apply a setting, press “Enter” while “Confirm” is displayed.
If you do not want to change the setting, you will need to press “Enter”
when “Cancel” is displayed.
5.5.2 Print Document Layout
This option will allow you to set the layout of the document for printing on
an ink printer. Press “Alt” to call up the menu while you are editing a
document, and select “Layout” or press “l” (which is the shortcut), and
then select “Print Document Layout.” Or, press “Alt-F6,” which is the hot
key for “print document layout.” The settings in this menu are applied to
all the paragraphs in the selected document. You can navigate the menu
items with “Up arrow key”or “Down arrow key,” and you can move to
“Confirm” or “Cancel” by pressing “tab”. You can skip an item by
pressing “Down arrow key” if you do not want to change the default
setting.
The following is a detailed explanation of each setting: