User's Manual

107
mail,” “Home page,” and “Memo.” Thus, one record contains all the
information you can keep about a person or company.
6.2 Starting the Address Manager
When you press “Enter” on “Address manager” in the “program” menu,
Voice Sense QWERTY will say “Search Address,” and display the
prompt, “Last name:.” In other words, when you start the “Address
manager,” the “Search Address” dialog box will be opened.
In “Address manager,” you can use the menus to conveniently browse
and execute all of the available commands. When you cannot remember
the exact hot key for the command that you want to execute, you can
press “Alt” to open the menu.
6.3 Using “Add Address”
This dialog box allows you to enter new addresses in the Address
manager. In order to use the “Add Address” function, press “Alt” to bring
up the “Address manager” menu, and then press the “Up arrow key,”
“Down arrow key” to move to “Add Address.” Then, press “Enter.” Or,
press “Ctrl-n” (which is the hot key) in “Address manager.” While you are
entering an address, you can use the “Search Address” function (refer to
section 6.4), “Set Address Fields” (refer to section 6.3.2), “Set Backup
Option (refer to section 6.5.3),” “Backup Address List (refer to section
6.5.1)” “Restore Address List (refer to section 6.5.2)” and “exit”
commands, using the menu or with other shortcut keys.
6.3.1 Adding an Address
“Add address” is a dialog box that contains a list of 22 input fields, the
“Memo” field, a “Confirm” button, and a “Cancel” button. In the input
fields, you can enter the information corresponding to the 22 fields of a
record. “Confirm” is used to save the information entered, and “Cancel”
is used to discard the entry. You can move among the input fields,