User's Manual

143
You can open the “Set Alarm Options” dialog box by pressing “Ctrl-o,” or
by pressing “Enter” on “Set Alarm Options” in the menu by pressing “Alt”
in the “Schedule manager.”This dialog box has a list of alarm option
fields, a “Confirm” button, and a “Cancel” button. Alarm option fields
include “Alarm duration,” “Alarm repeat interval” and “Repeat.” You can
move between these fields by pressing “Up arrow key”or “Down arrow
key.” You can access the “Confirm” and “Cancel” buttons by pressing
“tab” or “shift-tab”.
7.11.1 Alarm Duration
With this option, you can change the duration of the alarm sound. You
can set this option to a value that is between 5 and 600 seconds.The
default value is set to 30 seconds. You can enter the number into the
keyboard. Press “Enter” to save the changes, and exit from the dialog
box. If you want to set the “Alarm repeat interval” in the next field, you
should press “Down arrow key” to move to it.
7.11.2 Alarm Repeat Interval Time
When the alarm goes off, if you do not stop it by pressing “Ctrl,” the
Voice Sense QWERTY will keep giving you a notice about the
appointment after a specified time interval. The “Alarm repeat interval”
option allows you to change this interval. You can set the value
anywhere from 1 to 60 minutes, and the default value is set to 5 minutes.
You can enter the number into the keyboard. After entering the number,
press “Enter” to save the changes, and exit from the dialog box. Or, if
you press “tab”, the Voice Sense QWERTY will move to the “Repeat”
edit box.
7.11.3 Repetition Times