User's Manual

144
The alarm will make a sound as the amount of time that you changed
the alarm duration and it then stops. After a specified time interval, you
will hear again the alarm sound.
“Repeat” is a field, which allows you to decide how many times the alarm
will sound. You can set the value from 1 time to 10 times, and the default
value is set to 3 times. To change the value, you type in a number
between 1 and 10. After entering the number, you press “tab,” and press
“Enter” on the “Confirm” button.
Or, if you press “Enter” on the “Repeat” edit box, the changed options
will be saved, and the dialog box will be closed.
An alarm will repeat according to the number of times that you set for
this option and will then stop automatically. The LCD on the Voice Sense
QWERTY will also appear the “date” and “subject” for the alarm.
7.11.4 Confirm
By pressing “Enter” on the “Confirm” button, you will save the changed
settings, and close the “Set Alarm Options” dialog box.
7.11.5 Cancel
If you press “Enter” on the “Cancel” button, or press “ESC” or “Alt-F4,”
the previous option settings will be restored and “Set Alarm Options”
dialog box will be closed.
7.12 Synchronizing With Microsoft Outlook
In XP and earlier version, the “Schedule manager” can be synchronized
with Microsoft Outlook on your personal computer to help you keep track
of your appointments. For a more detailed explanation of how to connect
the Voice Sense QWERTY to your computer, and for more information
on how to use ActiveSync, refer to chapter 18. You should take the