User's Manual

161
ID, press “tab” to move to the “Cancel” button, and press “enter,” or just
press “ESC.”
8.2.2.4 CC Control
“CC” shows the carbon copy recipient. This control will be shown if the
email has a "CC".
You can save the e-mail id of the carbon copy recipient using the
following sequence:
1) Press “Ctrl-i” when “CC: (carbon copy recipient’s e-mail address)
xx/yy” is displayed.
2) Then, the “add address” dialog box will be opened, and “Name:
(sender’s user name or e-mail address)” will be displayed.
3) Type in the carbon copy recipient’s name with your keyboard, or
press “tab” to move to “Confirm” and press “enter.”
When you type in the name, you can type it in “Name” edit box directly. If
the address that was typed in is saved, and the dialog box is closed, the
Voice Sense QWERTY will show you the “CC” item again.
8.2.2.5 Message Control
“Message” shows the message body of the selected e-mail. You can
move to a message by pressing “tab.” Or, you can read a message by
pressing “enter” when “Subject,” “Date,” or “From” is displayed. In case
of pressing “enter” on “Subject,” “Date,” “From” controls, you will
automatically hear the whole message body, if you want to stop this
reading at this time, just press “Ctrl.”
If you want to move the “Subject” while reading the message, press
“ESC”.
When you read the message, all of the control keys are the same as in
the word processor.