User's Manual

178
“Enter.” You can rename the file. The method is the same as
“Save as” in Word processor.
9) You will return to where you call the menu automatically if the e-
mail is saved.
The text file will be saved in “flashdisk/My Documents” with the file name
“(subject of e-mail under reading).txt.” You cannot change the file
format. You can read the saved text file in the word processor.
In order to cancel “Save As Text,” press “Tab” on the “Confirm”, move to
“Cancel”. And press “Enter.” Or, just press “ESC” or “Alt-F4”.
8.3.5 Printing E-Mail Messages
You may want to print an email that you received or sent in using either
an embosser or an ink printer.
In order to print to an ink printer, do the following:
1) Connect the Voice Sense QWERTY to an ink printer with the
printer cable that was provided by the manufacturer of the printer.
The printing port must be the same port that was set in the “Print
port” in the “Global options”.
2) Press “Alt” to call up the menu.
3) It will show “File”.
4) Press “Enter” on the “File”.
5) Press “Down arrow key”, move to “Print E-mail.”
6) Press “Enter” on the “Print E-mil”.
7) It will show the “Print type”. Without calling up the menu, press
“Alt-p” move to this stage directly.
8) Press “Space” or “Down arrow key”, you change setting value of
the “Print type”. Setting value is “Printer” and “Embosser”.
9) After selecting the “Print type”, press “Enter”. Or press “Tab” move
to the “Confirm” and press “Enter”.
10) Then, the selected e-mail will be printed.