User's Manual

195
8) Press “Down arrow key” when “Type: Subject 1/3” is displayed in
order to move to “Type: Host 3/3.”
9) Press “a” on “Type: Host 3/3,” or press “Tab” to move to the
“Add” button, and then press “Enter.”
10) Then, the “Add dialog box” will be opened, and “Host add: (host
address)” will be displayed. Here, “host address” is the host
address that was focused on when you executed this command.
11) Press “Enter” on “Host add: (host address).” Or, press “tab” to
move to the “Confirm” button, and then press “enter.”
12) Then, the Voice Sense QWERTY will say “Successfully added
spam data” and it will show “Host: (registered host address) 1/1.”
If you add the host address as above, the e-mails from the registered
host will be downloaded from the e-mail server, but the Voice Sense
QWERTY will delete them automatically. So those e-mails will not be
found in the inbox.
When “Host: (registered host address) 1/1” is displayed, you can add it
by pressing “a” or pressing “Tab” to move to the “Add” button, and then
press “Enter.” You can check the registered host addresses by pressing
“Up arrow key” or “Down arrow key.”
When you register a subject, e-mail address, or host as spam e-mail,
you may make a mistake while you are typing in a subject, e-mail
address, or host. In this case, you need to modify the subject while
typing them in.
Please refer to the following correction methods:
1. In order to delete the current letter, press “Del”
2. In order to delete the previous letter, press “Backspace.”
3. In order to delete the current line, press “Ctrl-Backspace.” Then,
“Delete line: yes” will be displayed. Press “enter” to delete the line.
Or, if you do not want to delete the line, press “Space” to toggle “Yes”
to “No,” and then press “enter.”