User's Manual

228
when these options are set to higher values. You can change these
values by pressing “Space.”
When you record the file using the external microphone, you must set to
“External Mic” the “record source.” And when you record the file using
the line-in-cable, you must set to “Line in” the “record source.” And when
you record the file using internal microphone, you must set to “Internal
Mic” the “record mode.”
The “Set folder” allow you to set the default folder where the recorded
files will be saved. Its default value is set to “/flashdisk/media/record.”
To specify a different folder, press “Enter” on “Set folder,” and the same
dialog box as the “Open Folder” dialog box will be displayed. Select a
folder in the same way as in the “Open Folder” dialog box. (Refer to
section 9.3.1.2 for more information about how to select a folder.)
If you save the changed settings, and exit from this dialog box, press
“Enter” after changing all of the options you want to change, or move to
the “Confirm” button, and press “Enter.” If you want to cancel the
changes you made, press “Enter” on the “Cancel” button, or press
“ESC.”
9.3.6.4 Effect Settings Dialog Box
Press “Alt” in media player program, move to “Settings” menu and press
“Enter”. By pressing “Down arrow key”, move to “Effect settings”. Press
“Enter” on “Effect settings” or press “E”. Or press “Ctrl-e” in “Play list tab”
or “Playback information tab”.
“Effect settings” dialog box will be displayed, which contains the
following: the “Bassboost” option, the “Surround” option, the “3D Effect”,
the “Reverb” option, the “Echo” option, a “Confirm” button, and a
“Cancel” button. You can move between controls by pressing “Tab” or
“Shift-Tab”. And you can move between options by pressing “Up arrow
key” or “Down arrow key.”