User's Manual

241
Press “Enter” to get into the “Open URL” edit window, or press “Ctrl-l”
while the Web browser is open. When “Open URL” is executed, the edit
window for an address will be displayed. On the LCD, you will see the
current address. You can enter a new web page address that you want
to connect to. You need to enter the new address such as
“www.google.com.” Then, press “Enter.”
You can check the addresses that have been entered previously by
pressing the Down arrow key. Move to the address that you want to
open using the Up arrow key or the Down arrow key, and press “Enter”
when the desired URL is displayed. You can go to a specific web page
either by typing in a new address, or by selecting one of the previously
entered addresses.
If the Voice Sense QWERTY cannot connect to the desired web page,
and it only hears progress to TTS , press “ESC” to stop connecting, and
call up “Open URL” again. You can type in the address and try to
connect again. You can stop the Web browser from connecting by
pressing “Alt-F4. Sometimes, this can happen due to network or Internet
problems.
11.1.2 Open
In order to enter into “Open,” press “Alt” to call up the “menu,” and press
“Enter” on “File.” Go to “Open” by pressing “Down arrow key,” and press
“Enter.” Or, you can press “Ctrl-o” when the Web browser is active.
Then the “Open dialog box” will show up.
“Open dialog box” consists of “file list,” “File name,” “Type,” “Confirm”
button and “Cancel” button. You can move among those controls by
pressing “tab” or “shift-tab”. When the “Open dialog box” is opened, “File
name” will be focused. Type in a file name, and press “Enter,” or press
“shift-tab”to move to the file list. Select the desired file name, and press
“Enter.”
The default folder is “/flashdisk/download,” and it can be changed by the
same method as explained in the “File manager.”