User's Manual

272
1) Press “Alt” to call up the menu.
2) Move to “Voice Settings,” which is located under the “File” menu
and press “Enter”. Or press “s”.
3) Also you can directly activate the “Voice Settings” by pressing
“Ctrl-s”.
It will open the “Voice Settings” dialog box.
In the dialog box,
1. DAISY play type(It will show while playing text+audio DAISY)
2. Voice control
1) Set speed
2) Set volume
3) Set to control information of contents
3. Confirm
4. Cancel
You can move between the four controls with “Tab” or “Shift-Tab.” In
“Voice control,” you can move between “Set speed”, “Set volume” and
“Set to control information of contents” with “Up arrow key” or “Down
arrow key”.
If you cancel this function, press “ESC” or “Alt-F4”.
12.2.2.1 DAISY play type
It will show while playing text+audio DAISY. You can use this function
when you play the text+audio DAISY. The default setting is “Audio”.It will
play with audio in text+audio Daisy. If you set the “Text”, it will play with
text in text+audio Daisy.
To change the setting value, press “Up arrow key” or “Down arrow key”.
After changing the setting value, press “Enter”. Or press “Tab”, move to
“Confirm” and press “Enter”.
Without calling the menu, you can directly this function by pressing “Ctrl-
t”.