User's Manual

293
that you cannot select folders. You can only select files. If you try
to select a folder, the Voice Sense QWERTY will say
“Deactivated.”
3) Once you have selected files by pressing the “Space,” you can
copy them by pressing “Alt,” and then navigate to “Copy” by
pressing “Up arrow key”or “Down arrow key” and press “Enter.” Or,
you can press “Ctrl-c” to activate the function without calling up the
menu.
4) After you have activated the copy function, you will hear,
“Copying” and then “Open Remote Folder.” You will then be
moved to the remote folder list.
5) In the remote folder list, you can navigate to the folder where you
want to paste the file. Once you are in the folder where you want
to paste the file, press “Ctrl-v”. Or, you can press “Alt”,and then
use “Up arrow key”or “Down arrow key”to get to the “Paste”
function, and press “Enter.” While pasting, you will hear a sound
that indicates that the Voice Sense QWERTY is working. If the file
is larger than 300 KB, you will also hear the progress meter each
time an additional 10% has been completed. If the file is less than
300 KB, then you will only hear the sound, and not the progress
meter.
6) When the file has been pasted successfully, you will see the
message, “xxx file sent,” where xxx is the name of the file. If the
file is not pasted successfully, you will hear, “xxx file not sent.”
After the file is pasted successfully, you will also hear,
“successfully sent,” and you will be returned to the remote folder
list.
The following steps should be used to copy a file from the remote folder
list to the local folder list:
1) After the FTP service has connected, you can navigate through
the remote folder, just like in the file manager. If you need to
reference the navigation keys for the File manager, please refer to
chapter 4 in this manual.